Ordnance QF 3 pounder Vickers | |
---|---|
On a Royal Navy monitor circa. 1918 |
|
Type | Naval gun, Anti-aircraft gun |
Place of origin | United Kingdom |
Service history | |
In service | 1910-1940 |
Wars | WWI, WWII |
Production history | |
Designer | Vickers |
Designed | 1908 |
Manufacturer | Vickers |
Produced | 1910-? |
Number built | 600 |
Variants | Mk I Mk II |
Specifications | |
Weight | 1,323 lb (600 kg) in total |
Barrel length | 8 ft 8 in (2.64 m) bore (50 calibres) |
|
|
Shell | 47x360R. 3.3 lb (1.50 kg) shell. |
Calibre | 47 mm (1.85 in) |
Breech | semi-automatic vertical block |
Carriage | three-leg platform |
Elevation | -5° to +12° |
Traverse | 360° |
Rate of fire | 20 rounds per minute |
Muzzle velocity | 2,575 ft/s (785 m/s) (HE) |
Effective range | 2,000 yd (1,829 m)(AA) |
Maximum range | 5,600 yd (5,100 m) at 12° elevation; 15,000 ft (4,600 m) (AA ceiling) |
Sights | telescopic |
The Ordnance QF 3 pounder Vickers was a British artillery piece first tested in Britain in 1910. It was used on Royal Navy warships. It was more powerful than and unrelated to the older QF 3 pounder Hotchkiss, with a propellant charge approximately twice as large, but it initially fired the same Lyddite and Steel shells as the Hotchkiss.[1]
Contents |
Starting in 1914, the Royal Navy bought over 150 of these for use as anti-torpedo boat weapons on capital ships and to arm light craft. British production of these guns started in 1910 at Vickers and by the time production stopped in 1936 a total of 600 weapons had been made.
By 1911 about 193 guns of this type were in service, and they became standard equipment in the Royal Navy until 1915. In that year, service during the First World War proved these weapons to be ineffective and they were quickly removed from most of the larger ships. During the interwar years they were widely used to arm light ships and river craft. A number of them were converted into anti-aircraft guns and by 1927 at least 62 guns had been converted.
|